VIAL FILLING WITH STOPPERING
Vial Cap Sealing Machine
Description:
Shree Bhagwati makes a Complete range of Automatic liquid vial filling with Rubber Stoppering is a packed together model used for filling Stoppering of liquid in to vials.
Operation:
The inward dry container untainted are fed through the Unscrambled and duly guided on the moving SS flat conveyor belt at the necessary speed of the correct placement below wheel. The untainted liquid is stored in hopper is agitated by couple of perfunctory agitators for maintain steadiness and uniform bulk density. The wheel having eight ports rotates at the pre resolute speed below the hopper with almost no clearance. wheel consist of Piston in each port and at the back the wheel vacuum plate is provide there is no clearance connecting wheel and vacuum plate due to back spring pressure. Accurate volume of liquid is sucked in to the wheel throughout vacuum according to the piston length dissimilar fill size can be achieve. The excess liquid is doctored off by a doctor blade. Doctor blades can be familiar from outside also with no removing hopper. When wheel indexes additional and stay in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air in sequence flushes out liquid from the port of wheel in to the container one by one. The filled containers are right away removed on the conveyor by vial partition and moves further for Stop Peering function. (Different grooves partition can be used which depends on the storage place diameter or multiple dosing systems). Silicon zed, rubber stoppers the sterilized, store in the vibrator bowl moves to vibratory bowl and stack vertically in the rubber stopper chute. The container is hold firmly among pair or timing belt to pickup rubber stopper from way out end of the chute. Additionally the container is passed among two pressing roller for tight fit fixing of rubber stopper.
Technical Specifications:
Model No. |
SBPF-120 |
SBLFRS-150 |
Direction |
Left To Right. |
Left To Right. |
Production Rate |
6000 to 7000 vials/hour |
Up to 3,600- 7,200 vials per hours |
Accuracy |
±1% |
±1% |
Electrical Supply |
2.00 HP For Main Drive. |
1.00 HP For Main Drive. |
Power Requirement |
440 Volts, 3 Phase (4 wire System) 50 Hz. |
440 Volts, 3 Phase (4 wire System) 50 Hz. |
Height of Conveyor |
800 To 850 MM |
75 MM Maximum |
Automatic Aluminium Vial Cap Sealing Machine
Application:
Accordingly Stoppard Vials are incessantly fed from the turntable of filling machine to the flat conveyor belt of sealing machine and move advance through in feed worm for accurate spacing and transfer to the in feed star wheel.
Aluminium caps reserved in vibratory bowl mechanically orient caps in right direction previous to towards the inside the delivery chute. Vial throughout its rotation progress within feed star wheel, its pick up Aluminium seal from the retain finger of release chute and accurately location on the vial previous to towards the inside sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves slowly inside to total the sealing process during rotational movement of sealing platform turret. Now sealed vials are move to way out star wheel pocket and additionally move out on to the flat conveyor belt.
Technical Specifications:
Model No. |
SBCS-120V |
Output |
3,600- 7,200 per hour |
Electrical Supply |
2.0 HP For Main Drive |
No of Sealing Head |
4 Head |
Power Requirement |
440 Volts, 3 Phase 50 Hz. |
Height of Conveyor |
800 To 850 MM |
Vial Filling Stoppering & Cap Sealing Machine
Vial Filling Stoppering & Cap Sealing Machine